CAV Lucas Roto Diesel – DPA style Diesel Injection Pump Kit, End Plate, Carbon Blades and Liner. DPA 3233F360. DPA R3242610. Blades: 7123-388 R. Liner: 7139-223 R. This kit fits many pump applications for Perkins, Massey Ferguson, John Deere, International Harvester and David Brown.
OE CAV Lucas / Delphi / Roto-Diesel Transfer Pump BladesFits most DPA pumps, but these also fit some of the older Roosa Master DBG Pumps Part Numbers: CAV 7123-388 Stanadyne11318 Please send us your complete pump model number if you are not sure if these are right for your application. 8007367440dieselitems M – F 7:30 – 4:30 CT “Jason will be your pump man if you let him” From a Customer who Found Us on Ebay: “Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY”. Thank You so much Ken – AZNote: Some minor sanding of these is sometimes necessary to achieve free turning. Especially if installing in a DBG pump. Use very fine sand paper on a flat surface. I rebuild and set these pumps for a living, and have been doing so for 35 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use this kit will run about $450.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing. Here are some of things that can effect the price: Pump is locked up and/or the main drive shaft is broke. Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor. Cam ring in pump is worn, requires inspection during tear down. Pump has excessive rust and corrosion. Housing is damage or unusable. Here is how it works: Contact me with your pumps Models numbers. I will try to give you a closer estimate based on the problems you describe. Pump must not have been taken apart. Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel. You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment) We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days). If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you. Why would you want to do this? Pump will be cleaned, inspected, rebuilt, tested and will look and run great. All fully rebuilt units are invoiced and include a 6 months warranty. We will provide tips for reinstalling as well as some of the parts you may need to do so. We have access to parts, specifications and test equipment to make sure your pump is right. Remember the call is free, the service is great and my knowledge base covers over 26 years. Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks. Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection pump is assuming their own risk. * Name and Numbers are used for reference purposes only And items are not the products of these manufacturers.
eBay MICHIGAN, USA Have a question? Contact Visit Store Save Us As A Seller About Us Delphi CAV Fits Lucas Roto Top Cover Gasket Kit for DPA Diesel Injection Pumps Price:13.99 --> DESCRIPTION One New Universal Aftermarket Replacement CAV Injection Pump Kit (Minor) Tech Info: CAV style injection pump top gasket kit. L: 5″ x W: 2-1/4″ Brand Reliable Aftermarket Parts --> SKU SKU Goes Here --> Condition NEW Warranty 1 Year Warranty About Us Return Policy Shipping FAQ Reliable Aftermarket Parts, your trusted source for a wide range of replacement parts catering to various outdoor equipment. We specialize in providing top-quality replacement parts for Lawn and Garden, Snow Removal, UTV, ATV, and Golf Cart machinery. Our extensive inventory includes replacement parts for Backhoes, Crawlers, Excavators, Tractors, Skid Steers, and more, covering most leading brands and models in the industry. At Reliable Aftermarket Parts, customer satisfaction is our priority. If you have any inquiries or require assistance, please don’t hesitate to reach out. Feel free to call us at our Toll-Free Numbers: 1-888-6PARTS6 (1-888-672-7876) or directly at 517-347-7033. We welcome you to add us to your favorite seller’s list and trust us as your go-to destination for high-quality replacement parts. We provide a 30 day return policy, so if it does not fit, you don’t like the way it looks, or if it is unused, we take it back and refund your money. This return policy DOES NOT apply to glass or seat orders, for which these items can only be returned if the item was damaged on delivery, or the wrong item was shipped. Glass and Seat orders have a limited 15 day return policy. No returns will be accepted on Glass without photo evidence of damage. In the event of damage, shortage, or an error on any shipment, please contact us immediately via phone at 888-672-7876. PLEASE SAVE ALL ORIGINAL PACKAGING.! **Refer to eBay Return policy for more details. You are covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing.> How long does it take to ship out of the warehouse? Shipping times may vary. In house orders placed before 12PM (Noon) EST typically ship same day. How long does delivery to my address take? Delivery is determined by the type of shipping you go with. Normally, all orders are delivered within 3-7 business days. Many things can play a factor such as Location, Weather, and the items in the order. If you have any questions, please reach out to us before ordering. Call us at 888-672-7876! How do I know if my order was submitted properly? After completing checkout, you’ll be sent a confirmation via e-mail. If you ever have any questions about your order, please call us: 888-672-7876 Can I return an item that is defective, damaged, or I just don’t want? We provide a 30 day return policy, so if it does not fit, you don’t like the way it looks, or if it is unused, we take it back and refund your money. This return policy DOES NOT apply to glass or seat orders, for which these items can only be returned if the item was damaged on delivery, or the wrong item was shipped. Glass and Seat orders have a limited 15 day return policy. No returns will be accepted on Glass without photo evidence of damage. In the event of damage, shortage, or an error on any shipment, please contact us immediately via phone at 888-672-7876. PLEASE SAVE ALL ORIGINAL PACKAGING. Restocking Feee May Apply **Refer to eBay Return policy for more details. You are covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. How long does it take to ship out of the warehouse? Orders ship out within 24-48 business hours on average. Normally same day if before 1PM EST. How long does delivery to my address take? Delivery is determined by the type of shipping you go with. Normally, all orders are delivered within 3-7 business days. Many things can play a factor such as Location, Weather, and the items in the order. If you have any questions, please reach out to us before ordering. Call us at 888-672-7876! Featured Categories AGRICULTURE Shop Brands Fit: John Deere, Allis Chalmers, Ford/New Holland, Case, Massey Ferguson & More! CONSTRUCTION Shop Parts For: Allis Chalmers, International Harvester, Caterpillar, Komatsu & More LAWN & GARDEN Shop Brands Fit: Bad Boy, Briggs & Stratton, Cub Cadet, Honda, Sears, Snapper & More! SNOW REMOVAL Shop Parts For: Ariens, Briggs & Stratton, Jacobsen, Toro, Troy Built, Sears & More! 30 DAY RETURNS You can be safe in knowing that if your part doesn’t fit or work, you can return it quickly and easily within 30 days of purchase. FREE SHIPPING* We provide free shipping within the contiguous 48 United States of America. This does not apply for LTL shipments. *Qualifying order only EXPERT SERVICE Can’t track down a part that you need? Need help with a part you found? Contact our expertly trained customer service staff. Contact ©2023 Reliable Aftermarket Parts, Inc
CAV* Lucas* Roto Diesel* – DPA* style Diesel Injection Pump Kit Part Number: 7135-110 This replacement kit is new and in sealed package. This kit fits many pump applications for Ford, Perkins, Massy Ferguson, John Deere, and International Harvester. There are hundred of applications that this kit will work. Also please note that inside this kit are the line washers needed for installation. Pump Model Numbers that this kit will work for will start like this: DPA- ? This kit contains a single drive seal and is intended only for pumps that have single drive seal. NOTE: Some pumps have two drive seals and will require two different seals. To be for sure just send us your complete pump model number and we can check to see if this kit is right for your application. These are examples of complete pump Model Numbers: DPA 3233F360 DPA R3242610 *Name and Numbers are used for reference purposes only. If you need many kits just contact us, we will do our best to fill the order. Thanks Please send us your complete pump model number if you are not sure if this kit is right for your application. 8007367440dieselitems. M – F 7:30 – 4:30 CT “Jason will be your pump man if you let him” From a Customer who Found Us on Ebay: “Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY”. Thank You so much Ken – AZ I rebuild and set these pumps for a living, and have been doing so for 30 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use this kit will run about $425.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing. Here are some of things that can effect the price: Pump is locked up and/or the main drive shaft is broke. Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor. Cam ring in pump is worn, requires inspection during tear down. Pump has excessive rust and corrosion. Housing is damage or unusable. Here is how it works: Contact me with your pumps Models numbers. I will try to give you a closer estimate based on the problems you describe. Pump must not have been taken apart. Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel. You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment) We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days). If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you. Why would you want to do this? Pump will be cleaned, inspected, rebuilt, tested and will look and run great. All fully rebuilt units are invoiced and include a 6 months warranty. We will provide tips for reinstalling as well as some of the parts you may need to do so. We have access to parts, specifications and test equipment to make sure your pump is right. Remember the call is free, the service is great and my knowledge base covers over 26 years. Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks. Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection pump is assuming their own risk. * Name and Numbers are used for reference purposes only And items are not the products of these manufacturers.
This is a special kit for Japan made VE pumps only.Nippondenso, Diesel Kiki, ZexelThese pumps can have any one of three different types of drive seals, but that won’t be an issue with this kit, as it includes all three drive seal possibilities.Note: Many Japan made pumps will have odd accessories that may require additional seals: this kit is for the basic VE design. If you need many kits just contact us, we will do our best to fill the order. Thanks Please send us your complete pump model number if you are not sure if this kit is right for your application. 8007367440dieselitems M – F 7:30 – 4:30 CT “Jason will be your pump man if you let him” From a Customer who Found Us on Ebay: “Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY”. Thank You so much Ken – AZ I rebuild and set these pumps for a living, and have been doing so for 30 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use this kit will run about $750.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing. Here are some of things that can effect the price: Pump is locked up and/or the main drive shaft is broke. Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor. Cam ring in pump is worn, requires inspection during tear down. Pump has excessive rust and corrosion. Housing is damage or unusable. Here is how it works: Contact me with your pumps Models numbers. I will try to give you a closer estimate based on the problems you describe. Pump must not have been taken apart. Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel. You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment) We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days). If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you. Why would you want to do this? Pump will be cleaned, inspected, rebuilt, tested and will look and run great. All fully rebuilt units are invoiced and include a 6 months warranty. We will provide tips for reinstalling as well as some of the parts you may need to do so. We have access to parts, specifications and test equipment to make sure your pump is right. Remember the call is free, the service is great and my knowledge base covers over 26 years. Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks. Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection pump is assuming their own risk. * Name and Numbers are used for reference purposes only And items are not the products of these manufacturers.
This is a special kit for Japan made VE pumps only.Nippondenso, Diesel Kiki, ZexelThese pumps can have any one of three different types of drive seals, but that won’t be an issue with this kit, as it includes all three drive seal possibilities.Note: Many Japan made pumps will have odd accessories that may require additional seals: this kit is for the basic VE design. If you need many kits just contact us, we will do our best to fill the order. Thanks Please send us your complete pump model number if you are not sure if this kit is right for your application. 8007367440dieselitems M – F 7:30 – 4:30 CT “Jason will be your pump man if you let him” From a Customer who Found Us on Ebay: “Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY”. Thank You so much Ken – AZ I rebuild and set these pumps for a living, and have been doing so for 30 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use this kit will run about $750.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing. Here are some of things that can effect the price: Pump is locked up and/or the main drive shaft is broke. Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor. Cam ring in pump is worn, requires inspection during tear down. Pump has excessive rust and corrosion. Housing is damage or unusable. Here is how it works: Contact me with your pumps Models numbers. I will try to give you a closer estimate based on the problems you describe. Pump must not have been taken apart. Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel. You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment) We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days). If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you. Why would you want to do this? Pump will be cleaned, inspected, rebuilt, tested and will look and run great. All fully rebuilt units are invoiced and include a 6 months warranty. We will provide tips for reinstalling as well as some of the parts you may need to do so. We have access to parts, specifications and test equipment to make sure your pump is right. Remember the call is free, the service is great and my knowledge base covers over 26 years. Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks. Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection pump is assuming their own risk. * Name and Numbers are used for reference purposes only And items are not the products of these manufacturers.
**FOR DIESEL FUEL ONLY**One Way Check valve Non Return In-line with Fuel Filter 8mm or about 5/16″ Both sides are for 8mm or about 5/16″ lines.Filter/Strainer mesh is not exceptionally fine. Please be sure to check out the photo of the filter. **FOR DIESEL FUEL ONLY** Note: Other sizes available in our Ebay Store Stops stubborn leak back problems that may cause hard starting. This valve is designed to put inline where rubber hoses are used. Be sure to install it so the fuel can go in the direction desired. I have seen many a hard starting problem cured with one of these items. Please feel free to contact us with any questions you may have, We are here to help.