About this item Designed to strengthen the track drive motor area on small Chinese made mini excavators. Compatible with most 1-2 ton machines that use squared off drive motors. Please confirm your bolt hole spacing before ordering. Made to accept a 1.5″ square tube (not included) to form a structural cross-brace between the drive motors .You will need to supply your own 1.5″ square tube. We typically recommend 1/4″ wall thickness. Requires welding for installation. Includes 3rd hole for mounting a D ring shackle through for tie down or towing. The thickness is 16mm(0.63inch) and the width of the square hole in the middle is 1.55 inches Included: .

About this item Designed to strengthen the track drive motor area on small Chinese made mini excavators. Compatible with most 1-2 ton machines that use squared off drive motors. Please confirm your bolt hole spacing before ordering. Made to accept a 1.5″ square tube (not included) to form a structural cross-brace between the drive motors .You will need to supply your own 1.5″ square tube. We typically recommend 1/4″ wall thickness. Requires welding for installation. Includes 3rd hole for mounting a D ring shackle through for tie down or towing. The thickness is 16mm(0.63inch) and the width of the square hole in the middle is 1.55 inches Included: .