*CHECK Dimensions below to see if it will fit your bucket where you would like to mount it! (7-3/4″ X 2″ inch LONG)( We have smaller ones at our Ebay Store) * PLEASE DO NOT BUY BEFORE YOU MEASURE YOUR TRACTOR’S BUCKET! * Great for John Deere, Kubota, Kioti, Mahindra, and ANY TRACTOR with a Bucket Checkout our Huge inventory of Tractor pins and American made Tractor attachments on our Ebay Store below: ebay.com/str/rguileindustrial Handmade by Rguile.com Industrial in the USA Tractor, Skidsteer, Bolt On Bucket Hook / Shackle Tractor / Skidsteer bucket hook. This Shackle / Grab hook was designed to be easily bolted on to your bucket. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8 steel backing plate along with the front 3/8 hook plate to sandwich your bucket steel. This will create a 3/4″ + thick by 8″ long to distribute strength. You will need a 1/2 drill bit in order to drill (2) holes for the 1/2″ Grade 8 bolts and hardware. The grab hook and shackle combo is great for a variety of chains or ropes. Also, if you are picking up something with a large chain with hook you don’t have to drag the end on the ground. You can hook it on the shackle. This is something I have ran into while dragging logs with a long chain. The hook and shackle base are double welded to last. * 5/16″ Chain Grab Hook * Made with 3/8 x 2 Flat bar mild steel * Mig welded for Strength * Shackle mount is 3/4″ thick. (double 3/8 thick) * Shackle is 1/2″ * Dimensions 7-3/4″ by 2″ front and back plates * 6-1/16″ on center hole spacing on 9/16″ drilled/ tapered holes * 4000 pound capacity ( do not exceed bucket equipment capacity) * Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers * 1 year Warranty! Disclaimer: We are not responsible for any personal / property damage or injury and monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety. Scripture I live by: “WHO IS IT THAT OVERCOMES THE WORLD? ONLY THE ONE WHO BELIEVES THAT JESUS IS THE SON OF GOD” 1st epistle John Chapter 5:5.
*CHECK Dimensions below to see if it will fit your bucket where you would like to mount it! (7-3/4″ X 2″ inch LONG)( We have smaller ones at our Ebay Store) * PLEASE DO NOT BUY BEFORE YOU MEASURE YOUR TRACTOR’S BUCKET! * Great for John Deere, Kubota, Kioti, Mahindra, and ANY TRACTOR with a Bucket Checkout our Huge inventory of Tractor pins and American made Tractor attachments on our Ebay Store below: ebay.com/str/rguileindustrial Handmade by Rguile.com Industrial in the USA Tractor, Skidsteer, Bolt On Bucket Hook / Shackle Tractor / Skidsteer bucket hook. This Shackle / Grab hook was designed to be easily bolted on to your bucket. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8 steel backing plate along with the front 3/8 hook plate to sandwich your bucket steel. This will create a 3/4″ + thick by 8″ long to distribute strength. You will need a 1/2 drill bit in order to drill (2) holes for the 1/2″ Grade 8 bolts and hardware. The grab hook and shackle combo is great for a variety of chains or ropes. Also, if you are picking up something with a large chain with hook you don’t have to drag the end on the ground. You can hook it on the shackle. This is something I have ran into while dragging logs with a long chain. The hook and shackle base are double welded to last. * 5/16″ Chain Grab Hook * Made with 3/8 x 2 Flat bar mild steel * Mig welded for Strength * Shackle mount is 3/4″ thick. (double 3/8 thick) * Shackle is 1/2″ * Dimensions 7-3/4″ by 2″ front and back plates * 6-1/16″ on center hole spacing on 9/16″ drilled/ tapered holes * 4000 pound capacity ( do not exceed bucket equipment capacity) * Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers * 1 year Warranty! Disclaimer: We are not responsible for any personal / property damage or injury and monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety. Scripture I live by: “WHO IS IT THAT OVERCOMES THE WORLD? ONLY THE ONE WHO BELIEVES THAT JESUS IS THE SON OF GOD” 1st epistle John Chapter 5:5.
Bucket hooks with top hooks and lower shackle (2 hooks on top of your bucket and shackle on inside of bucket) Handmade by Rguile.com Industrial in the USA Tractor, Skidsteer, Bolt On Bucket Hook / Shackle (1) Hook/ shackle with (1) backplate Tractor / Skidsteer/ Loader bucket hook. * 2) 5/16″ Chain Grab Hook * 1) 1/2″ shackle (for lower plate) * Made with 3/8 inch x 3 inch Flat bar mild steel * Dimensions 11-1/8 inch by 3 inch front and back plates. * 9-7/8″ on center hole spacing on 9/16″ drilled/ tapered holes (for 1/16″ of play for both holes with 1/2″ inch bolts). Shipping Weight: 11 pounds * 4000 pound capacity ( do not exceed bucket equipment capacity) * Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers * 1 year Warranty! This Grab hook was designed to be easily bolted onto the bucket of your tractor. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8″ steel backing plate along with the front 3/8″ hook plate to sandwich your bucket steel. This will create a 3/4″ thick by 11-1/8″ long to distribute strength. Disclaimer: We are not responsible for any personal or property damage or injury. We are also not responsible for monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous, use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety. Scripture I live by: “WHO IS IT THAT OVERCOMES THE WORLD? ONLY THE ONE WHO BELIEVES THAT JESUS IS THE SON OF GOD” 1st epistle John Chapter 5:5.
Bucket hooks with top hooks and lower shackle (2 hooks on top of your bucket and shackle on inside of bucket) Handmade by Rguile.com Industrial in the USA Tractor, Skidsteer, Bolt On Bucket Hook / Shackle (1) Hook/ shackle with (1) backplate Tractor / Skidsteer/ Loader bucket hook. * 2) 5/16″ Chain Grab Hook * 1) 1/2″ shackle (for lower plate) * Made with 3/8 inch x 3 inch Flat bar mild steel * Dimensions 11-1/8 inch by 3 inch front and back plates. * 9-7/8″ on center hole spacing on 9/16″ drilled/ tapered holes (for 1/16″ of play for both holes with 1/2″ inch bolts). Shipping Weight: 11 pounds * 4000 pound capacity ( do not exceed bucket equipment capacity) * Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers * 1 year Warranty! This Grab hook was designed to be easily bolted onto the bucket of your tractor. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8″ steel backing plate along with the front 3/8″ hook plate to sandwich your bucket steel. This will create a 3/4″ thick by 11-1/8″ long to distribute strength. Disclaimer: We are not responsible for any personal or property damage or injury. We are also not responsible for monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous, use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety. Scripture I live by: “WHO IS IT THAT OVERCOMES THE WORLD? ONLY THE ONE WHO BELIEVES THAT JESUS IS THE SON OF GOD” 1st epistle John Chapter 5:5.