40″ Compressed PTO Driveline 1-3/8″ x 6 Spline QD on Tractor & Implement Ends Our eBay Store About Us Contact Us Add to Favorite Sellers 40″ Complete Economy PTO Driveline 1-3/8″ x 6 Spline QD Both Ends 179.95 40″ Compressed PTO Driveline 1-3/8″ x 6 Spline QD on Tractor & Implement Ends
Capacity to operate on tractors rated to 75 P.T.O. HP. Patented Quick Release Drive. Spring loaded, rotates about 30° by hand for quick release. Dependable operation, no sticking pins. No sharp edges, protrusions, or pins to injure operators. Female Spline: 1-3/8″ 6 Spline. Male Spline: 1-3/8″ 21 Spline. Length: 6-1/2″. Extends Tractor PTO Shaft End: 4-1/2″. Our eBay Store About Us Contact Us Add to Favorite Sellers PTO Adapter 1-3/8″ 6 Spline Female x 1-3/8″ 21 Spline Male – Extends PTO 4-1/2″ 54.95 Capacity to operate on tractors rated to 75 P.T.O. HP. Patented Quick Release Drive. Spring loaded, rotates about 30° by hand for quick release. Dependable operation, no sticking pins. No sharp edges, protrusions, or pins to injure operators. Female Spline: 1-3/8″ 6 Spline. Male Spline: 1-3/8″ 21 Spline. Length: 6-1/2″. Extends Tractor PTO Shaft End: 4-1/2″.
This ribs on this bale spear start at the tip and extends 25″ onto the shaft. Broken or worn out bale spears on your hay hauling equipment can be easily replaced to keep your machine running. This 31.5″ ribbed bale spear comes complete with a nut and can hold up to 3,500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing. Our eBay Store About Us Contact Us Add to Favorite Sellers 2 of 31.5″ Black Ribbed Bale Spears w/ 22 MM Nut 1,800 LB Capacity 38 MM Dia 92.95 Even hay spears become worn or break and no longer function. When this happens, be sure to replace them with our bale spears that are heat treated and are forged with a tapered end so can easily slip into or under hay bales. This spear also comes with a nut for user-friendly installation. It measures 31.5 inches long, with a 27 inch working length and a 38 mm. diameter. It also has a 3,500 lbs. maximum load
This ribs on this bale spear start at the tip and extends 25″ onto the shaft. Broken or worn out bale spears on your hay hauling equipment can be easily replaced to keep your machine running. This 31.5″ ribbed bale spear comes complete with a nut and can hold up to 3,500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing. Our eBay Store About Us Contact Us Add to Favorite Sellers 31.5″ Black Ribbed Bale Spears w/ 22 MM Nut 1,800 LB Capacity 38 MM Dia 54.95 Even hay spears become worn or break and no longer function. When this happens, be sure to replace them with our bale spears that are heat treated and are forged with a tapered end so can easily slip into or under hay bales. This spear also comes with a nut for user-friendly installation. It measures 31.5 inches long, with a 27 inch working length and a 38 mm. diameter. It also has a 3,500 lbs. maximum load
15″ x 8″ Implement Wheel Rim 6 Bolt Pattern w/ 4.62″ Pilot 1 1/8″ Offset SAE No. 635 3,800 LB Capacity Our eBay Store About Us Contact Us Add to Favorite Sellers 15″ x 8″ Implement Wheel Rim 6 Bolt Pattern w/ 4.62″ Pilot 3,800 LB Cap 174.95 15″ x 8″ Implement Wheel Rim 6 Bolt Pattern w/ 4.62″ Pilot 1 1/8″ Offset SAE No. 635 3,800 LB Capacity
Steel detachable chain is one of the oldest styles chains that are still in use today. Since the early 1900s steel detachable chains have been implemented in agricultural and industrial applications around the world. They stemmed from the original cast detachable chain design (Patented in 1873) and are manufactured to be light-weight, economical, and durable. We also have attachments and the easy to use steel detachable chain breaker! Our eBay Store About Us Contact Us Add to Favorite Sellers Detachable Steel Chain 10 Feet 1-15/16″ Width, 2.906″ Pitch w/ 41 Links 132.95 Steel detachable chain is one of the oldest styles chains that are still in use today. Since the early 1900s steel detachable chains have been implemented in agricultural and industrial applications around the world. They stemmed from the original cast detachable chain design (Patented in 1873) and are manufactured to be light-weight, economical, and durable. We also have attachments and the easy to use steel detachable chain breaker! This steel detachable chain is manufactured from a special hot-rolled strip steel that is heat-treated for increased strength and a longer wear life. This type of chain is designed for moderate loads and speeds, it is extremely easy to repair and install. Something important to note when installing and using steel detachable chain is that the closed end of the tab should always be towards the sprocket.
TriggerJet 22670-PP-15-1/4. 15″ Poly Extension, 1/4″ (F) Inlet Connection, 150 psi max. The 22670 TriggerJet spray gun kit combines the 22650 TriggerJet spray gun with an extension wand and the items listed in features. Maximum pressure rating is 150 PSI. -22650 TriggerJet spray gun with a 1/4″ Hose Shank an a 1/4″ NPT or BSPT (F) thread inlet connection. -Trigger lock permits locking gun in an open position for continuous flow. -38720-PPB-X8 adjustable ConeJet spray tip with Viton O-Ring. Our eBay Store About Us Contact Us Add to Favorite Sellers 2 of TriggerJet TeeJet Spot Spray Gun 15″ Poly w/ 1/4″ FPT Inlet on Handle 99.95 TriggerJet 22670-PP-15-1/4. 15″ Poly Extension, 1/4″ (F) Inlet Connection, 150 psi max. The 22670 TriggerJet spray gun kit combines the 22650 TriggerJet spray gun with an extension wand and the items listed in features. Maximum pressure rating is 150 PSI. Features: -22650 TriggerJet spray gun with a 1/4″ Hose Shank an a 1/4″ NPT or BSPT (F) thread inlet connection. -Trigger lock permits locking gun in an open position for continuous flow (optional). -22665 extension wand 15″ -38720-PPB-X8 adjustable ConeJet spray tip with Viton O-Ring. -CP22673-PP 45º and CP22664-PP straight adapters. -Accepts all standard TeeJet spray tips and tip strainers.
Disc harrow blades and plow discs have a variety of uses to include discing, hilling, plowing, and turning soil. Our eBay Store About Us Contact Us Add to Favorite Sellers 2 of 22″ Notched Disc Harrow Blade 1-1/2″ Round 6 Gauge 5 MM Thick 159.95 Disc harrow blades and plow discs have a variety of uses to include discing, hilling, plowing, and turning soil.
Delavan designs, engineers and manufactures a wide variety of roller pumps to meet the widest ranges of low-volume, moderate-pressure pumping applications. To ensure the best performance for your investment, we incorporate such features as “Ultra” rollers, heavy-duty sealed bearings, Viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard. Max flow: 22.5 GPM Max pressure: 200 PSI Max speed: 850 RPM Port sizes: 1″ NPT Pump shaft rotation: CCW Our eBay Store About Us Contact Us Add to Favorite Sellers Delavan 7 Roller Cast Iron Pump 15/16″ Shaft & 1″ NPT Inlet & Outlet 254.95 This economical 7 Roller Delavan RollerPRO 7900C Roller Pump is optimal for farm, commercial, and industrial uses. With a sturdy cast iron body and a 1″ female NPT side port, this industrial pump works via a PTO shaft, an electric motor, or a gas engine. When powered, the fluid will enter the intake area at a constant rate, then the shaft and rotors will pump the liquid out through the outlet area. The 7900C roller pump has solid shaft that measures 15/16″ and rotates in a counter-clockwise direction. These agricultural water pumps have a maximum flow of 22.5 GPM and a maximum operation speed of 850 RPM. The maximum fluid temperature is 140 ° F. It only takes a wrench to install, with no plumbing disassembly required. Delavan designs, engineers and manufactures a wide variety of roller pumps to meet the widest ranges of low-volume, moderate-pressure pumping applications. To ensure the best performance for your investment, we incorporate such features as “Ultra” rollers, heavy-duty sealed bearings, Viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard. Max flow: 22.5 GPM Max pressure: 200 PSI Max speed: 850 RPM Port sizes: 1″ NPT Pump shaft rotation: CCW
Pitman Strap for Front Strap.