New Side drive Top gear (16 teeth) for King Kutter TG Series roto-cultivators. Part number 902022 Fits all King Kutter TG Series rotary tillers. Specification: – Top gear 16 teeth – 8 internal splines Gear dimensions: 4-3/16″ Outer diameter 1 9/16″ Spline diameter (larger inside) 13/16″ Thickness Please also see the other connected gears for the same tiller side drive 902022 Gear, Top – Z16 902021 Gear, Center -Z34 902020 Gear – Bottom -Z28 MPN 902022(RT-032)Return policyReturns will not be accepted, unless the product is returned within 30 days and is in its original condition unopened, unused, undamaged packaging and tag must still be attached. Buyer is responsible for return shipping. Any damage claims must be accompanied by photographs and/or the damaged product being returned to seller. A 20% restocking charge applies.The use of original equipment manufacturer’s names, drawings, colors, and part numbers are used for identification purposes only, is not implying that any of our products are original equipment parts.
D&M SUPPLY Providing quality parts and accessories to the hard working farmer at reasonable prices. We have over 30 years experience in agriculture. We are an official authorized distributor for Majic Paint. The best you can use for your equipment.Note: State of CA. Proposition 65Due to state regulations, we are prohibited to ship to California. 6 cans of yellow to match caterpillar and King Kutter due to shipping regulations of paint, this item can only ship ground and may be delayed 2-4 days for clearance. Due to regulations, paint cannot be returned under any circumstances.North Carolina residents required to pay 7.75% sales taxPayment:PayPal is our accepted form of payment. Through PayPal you can use your credit card or bank account for payment options.Go to the PayPal website for any questions you have on their payment options.Please Note: The buyer is responsible for ensuring correct fitment of items. Please contact us before bidding if you have any questions. Shipping charges are not refundable and returns due to customer order errors are subject to a 15% restocking fee.Shipping: Orders are typically shipped within 1-4 business days of payment being received. Please make sure your preferred shipping address is updated in your eBay profile. Do not include shipping instructions with your PayPal payment as we do not monitor the payment notes. We ship Monday through Friday 9am to 1pm. Our office is closed on weekends and may be extended on holidays. Notice items may ship via Fedex smartpost.The address you use must be usable by the USPS. This service uses both Fedex and USPS for delivery.Once the item leaves our facility we have no control over when and how it is delivered.Once you have the tracking number we cannot answer questions as to when an item will be delivered. If you have questions you can call Fedex for expected time or arrival. Free shipping is to the contiguous U.S. only; Alaska, Hawaii and Puerto Rico are subject to additional shipping fees. For shipping fees to these locations please contact us before bidding. Important: We can only ship to an address on file in your eBay account. Please do not request we send your order to a different address via e-mail.We are not allowed by eBay to ship to an alternate addresses.Any request we receive via email will not be honored.Our items will require a physical address.Be sure you have a physical address set up in eBay before making your purchase.Return Policy: If you are not satisfied with your purchase, we will gladly exchange it or offer a refund (excluding shipping) with a 15 % restocking fee. Any order cancellations will have same restocking fees as returns.All buyers must contact us via email within 7 days of receipt before returning an item. Item must be returned within 14 days. Any returned items must be sent in original condition, box and with all received documents/invoices. Buyer is responsible for return shipping cost, No Exceptions. Item Availability: We do our best to maintain accurate inventory on our eBay site, however due to the combination of eBay orders and customer pickups, sometimes items will sell both on-line and from our warehouse concurrently. It is possible a customer picked up our last part.In this case we will notify you so you can decide to wait for our new inventory to arrive or receive a full refund. International Orders:Payment for international orders must be paid with paypal No returns on international sales. D&M Supply is a licensed business as a retailer of quality products.It is agreed by all parties in relation to any transaction involving this product, won through eBay or not, D&M Supply will not assume responsibility for any performance, safety, longevity, functionality for product sold. D&M Supply will not assume any responsibility for freight costs or loss of time, labor, or crop. D&M Supply will not be responsible for any personal injury or any aspects associated. Proper installation and use of this product is the responsibility of the buyer. For more competitive and greater buying options, visit our website. D&M Supply Inc is in not affiliated in any way with OEM (original Equipment Manufacturers). All OEM part numbers, Trademarks, and Brand Names are to be used for identification purposes only. Important Note About our PaintOur paint is premium and made to the factory oem paint color. It will be close but is not possible to be an exact match due to lot to lot variances. Also color match has to do with the Implement age,fading and condition. Buyers acknowledge and assume all aspects of buying this paint.ShippingSpray paint has to ship via a special service and cannot be returned for any reason.
D&M SUPPLY Providing quality parts and accessories to the hard working farmer at reasonable prices. We have over 30 years experience in agriculture. We are an official authorized distributor for Majic Paint. The best you can use for your equipment.Note: State of CA. Proposition 65Due to state regulations, we are prohibited to ship to California. 2 cans of yellow to match caterpillar and King Kutter due to shipping regulations of paint, this item can only ship ground and may be delayed 2-4 days for clearance. Due to regulations, paint cannot be returned under any circumstances.North Carolina residents required to pay 7.75% sales taxPayment:PayPal is our accepted form of payment. Through PayPal you can use your credit card or bank account for payment options.Go to the PayPal website for any questions you have on their payment options.Please Note: The buyer is responsible for ensuring correct fitment of items. Please contact us before bidding if you have any questions. Shipping charges are not refundable and returns due to customer order errors are subject to a 15% restocking fee.Shipping: Orders are typically shipped within 1-4 business days of payment being received. Please make sure your preferred shipping address is updated in your eBay profile. Do not include shipping instructions with your PayPal payment as we do not monitor the payment notes. We ship Monday through Friday 9am to 1pm. Our office is closed on weekends and may be extended on holidays. Notice items may ship via Fedex smartpost.The address you use must be usable by the USPS. This service uses both Fedex and USPS for delivery.Once the item leaves our facility we have no control over when and how it is delivered.Once you have the tracking number we cannot answer questions as to when an item will be delivered. If you have questions you can call Fedex for expected time or arrival. Free shipping is to the contiguous U.S. only; Alaska, Hawaii and Puerto Rico are subject to additional shipping fees. For shipping fees to these locations please contact us before bidding. Important: We can only ship to an address on file in your eBay account. Please do not request we send your order to a different address via e-mail.We are not allowed by eBay to ship to an alternate addresses.Any request we receive via email will not be honored.Our items will require a physical address.Be sure you have a physical address set up in eBay before making your purchase.Return Policy: If you are not satisfied with your purchase, we will gladly exchange it or offer a refund (excluding shipping) with a 15 % restocking fee. Any order cancellations will have same restocking fees as returns.All buyers must contact us via email within 7 days of receipt before returning an item. Item must be returned within 14 days. Any returned items must be sent in original condition, box and with all received documents/invoices. Buyer is responsible for return shipping cost, No Exceptions. Item Availability: We do our best to maintain accurate inventory on our eBay site, however due to the combination of eBay orders and customer pickups, sometimes items will sell both on-line and from our warehouse concurrently. It is possible a customer picked up our last part.In this case we will notify you so you can decide to wait for our new inventory to arrive or receive a full refund. International Orders:Payment for international orders must be paid with paypal No returns on international sales. D&M Supply is a licensed business as a retailer of quality products.It is agreed by all parties in relation to any transaction involving this product, won through eBay or not, D&M Supply will not assume responsibility for any performance, safety, longevity, functionality for product sold. D&M Supply will not assume any responsibility for freight costs or loss of time, labor, or crop. D&M Supply will not be responsible for any personal injury or any aspects associated. Proper installation and use of this product is the responsibility of the buyer. For more competitive and greater buying options visit our website. D&M Supply Inc is in not affiliated in any way with OEM (original Equipment Manufacturers). All OEM part numbers, Trademarks, and Brand Names are to be used for identification purposes only. Important Note About our PaintOur paint is premium and made to the factory oem paint color. It will be close but is not possible to be an exact match due to lot to lot variances. Also color match has to do with the Implement age,fading and condition. Buyers acknowledge and assume all aspects of buying this paint.ShippingSpray paint has to ship via a special service and cannot be returned for any reason.
Replace your worn tiller tines with these High Quality Boron Steel Italian made replacement tines for King Kutter TG & TG-G Series Tillers in 48″, 60″ and 72″ widths. The original equipment tines King Kutter uses are made in China and are not made to the standards of these High Quality heat treated Italian tines. This listing is for Six each left hand and right hand tines that will fit both the TG and TG-G models. Please check tine dimensions below to make sure of fitment. If you need more than three left hand and three right hand tine just increase the quantity you would like to order to match your needs. We also have sets of 1 each and complete sets for the 48″, 60″ and 72″ machines listed in our store. If you are interested in less expensive tines I have “made in China” tines available for the King Kutter Tillers in our eBay store! These tines are 1/4″ thick and 2-1/2″ wide at the cutting edge. They have 9/16″ bolt holes that are spaced 1-9/16″ on center. These tines measure 7-1/2″ from the tip of the cutting edge to the top of the tine measured straight across the tine not around the bend. We sell replacement tines and parts for most brands of Roto Cultivators, if you don’t see them listed here please feel free to give me a call. Part Numbers: 505012 We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information. Shipping InformationBidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm We are located at: Brooks Ag Parts 1726 State Route 125 Amelia, OH 45102 Payment TermsHigh bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Ohio Residents OnlyState of Ohio residents must add 6.75% state sales tax. Both product and shipping / handling charges are subject to state sales tax If this auction is for farm use you can fill out a farm use tax exemption certificate and no sales tax will be applied. Farm use tax exemption certificates must be on file before we ship or sales tax will be applied. Return PolicyYour complete satisfaction is important to us, should you have and problems please let us know so we can correct them. We have a simple return and refund policy. Bidder is responsible for all shipping charges on returned merchandise. All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! If you have any question about the part you need, please call first we will be glad to answer your questions. Additional Information The use of original equipment manufacturer’s names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts. All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.
Replace your worn tiller tines with these High Quality Boron Steel Italian made replacement tines for King Kutter TG & TG-G Series Tillers in 48″, 60″ and 72″ widths. The original equipment tines King Kutter uses are made in China and are not made to the standards of these High Quality heat treated Italian tines. This listing is for three each left hand and right hand tines that will fit both the TG and TG-G models. Please check tine dimensions below to make sure of fitment. If you need more than three left hand and three right hand tine just increase the quantity you would like to order to match your needs. We also have sets of 1 each and complete sets for the 48″, 60″ and 72″ machines listed in our store. If you are interested in less expensive tines I have “made in China” tines available for the King Kutter Tillers in our eBay store! These tines are 1/4″ thick and 2-1/2″ wide at the cutting edge. They have 9/16″ bolt holes that are spaced 1-9/16″ on center. These tines measure 7-1/2″ from the tip of the cutting edge to the top of the tine measured straight across the tine not around the bend. We sell replacement tines and parts for most brands of Roto Cultivators, if you don’t see them listed here please feel free to give me a call. Part Numbers: 505006 We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information. Shipping InformationBidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm We are located at: Brooks Ag Parts 1726 State Route 125 Amelia, OH 45102 Payment TermsHigh bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Ohio Residents OnlyState of Ohio residents must add 6.75% state sales tax. Both product and shipping / handling charges are subject to state sales tax If this auction is for farm use you can fill out a farm use tax exemption certificate and no sales tax will be applied. Farm use tax exemption certificates must be on file before we ship or sales tax will be applied. Return PolicyYour complete satisfaction is important to us, should you have and problems please let us know so we can correct them. We have a simple return and refund policy. Bidder is responsible for all shipping charges on returned merchandise. All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! If you have any question about the part you need, please call first we will be glad to answer your questions. Additional Information The use of original equipment manufacturer’s names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts. All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.
Replace your worn tiller tines with these High Quality Boron Steel Italian made replacement tines for King Kutter TG & TG-G Series Tillers in 48″, 60″ and 72″ widths. The original equipment tines King Kutter uses are made in China and are not made to the standards of these High Quality Heat Treated Italian tines. This listing is for one each left hand and right hand tine that will fit both the TG and TG-G models. Please check tine dimensions below to make sure of fitment. If you need more than one left hand and one right hand tine just increase they quantity you would like to order to match your needs. We also have sets of 3 each and complete sets for the 48″, 60″ and 72″ machines listed in our store. Complete sets are sold at discounted pricing. If you are interested in less expensive tines I have “made in China” tines available for the King Kutter Tillers in our eBay store! These tines are 1/4″ thick and 2-1/2″ wide at the cutting edge. They have 9/16″ bolt holes that are spaced 1-9/16″ on center. These tines measure 7-1/2″ from the tip of the cutting edge to the top of the tine measured straight across the tine not around the bend. We sell replacement tines and parts for most brands of Roto Cultivators, if you don’t see them listed here please feel free to give me a call. Part Numbers: 505002 We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information. Shipping Information Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm We are located at: Brooks Ag Parts LLC 1726 State Route 125 Amelia, OH 45102 Payment Terms High bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Ohio Residents Only State of Ohio residents must add 6.75% state sales tax. Both product and shipping / handling charges are subject to state sales tax Return Policy Your complete satisfaction is important to us, should you have and problems please let us know so we can correct them. We have a simple return and refund policy. Bidder is responsible for all shipping charges on returned merchandise. All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! If you have any question about the part you need, please call first we will be glad to answer your questions. Additional Information The use of original equipment manufacturer’s names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts. All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.
Replacement belt for King Kutter RFM 60″ Cut Finish Mower. This listing is for one replacement belt for the 60″ cut King Kutter mower. We also stock additional replacement parts for King Kutter products, please contact us if you don’t see the items you are looking for and we will be glad to work for your business. Part Numbers: 167133 We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information. Shipping Information Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm We are located at: Brooks Ag Parts LLC 1726 State Route 125 Amelia, OH 45102 Payment Terms High bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Ohio Residents Only State of Ohio residents must add 6.75% state sales tax. Both product and shipping / handling charges are subject to state sales tax If this auction is for farm use you can fill out a farm use tax exemption certificate and no sales tax will be applied. Farm use tax exemption certificates must be on file before we ship or sales tax will be applied. Return Policy Your complete satisfaction is important to us, should you have and problems please let us know so we can correct them. We have a simple return and refund policy. Bidder is responsible for all shipping charges on returned merchandise. All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! If you have any question about the part you need, please call first we will be glad to answer your questions. Additional Information The use of original equipment manufacturer’s names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts. All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.
This listing is for one set of six (6) King Kutter 500101 Grade 2 Shear Bolts / Shear Pin with nuts and washers. This will also include FREE Shipping. Fits King Kutter Rotary cutters and King Kutter Finish Mowers. 3-1/2″ length, Grade 2 Shear Bolt that is plated to resist from rusting. DN Equipment also stocks other parts for many of brands and types of equipment. If you are looking for something specific that you do not see, contact us! Buy with confidence, DN Equipment only sells OEM quality replacement parts, not low quality aftermarket parts like some other parts houses do! Part Number: 500101 Shipping Information Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm Please call before you come to verify items are in stock, we try to keep all advertised items in stock at all times, we would hate to have you visit us and not have the item you are looking for when you get here! Payment Terms High bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Personal check orders held 10 days or until check clears. Ohio Residents Only State of Ohio residents must add 7.25% state sales tax. Both product and shipping and handling charges are subject to state sales tax If this auction is for farm use you can fill out a farm use tax exemption certificate and no sales tax will be applied. Farm use tax exemption certificates must be on file before we ship or sales tax will be applied. Return Policy Your complete satisfaction is important to us. We have a simple return and refund policy. All returns are subject to a 10% restocking fee. Bidder is responsible for all shipping charges on returned merchandise. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. All refunds will be for full bid price paid less 10% restocking charge. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
This listing is for one set of six (6) King Kutter 500101 Grade 2 Shear Bolts / Shear Pin with nuts and washers. This will also include FREE Shipping. Fits King Kutter Rotary cutters and King Kutter Finish Mowers. 3-1/2″ length, Grade 2 Shear Bolt that is plated to resist from rusting. DN Equipment also stocks other parts for many of brands and types of equipment. If you are looking for something specific that you do not see, contact us! Buy with confidence, DN Equipment only sells OEM quality replacement parts, not low quality aftermarket parts like some other parts houses do! Part Number: 500101 Shipping Information Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Bidder pays for all shipping charges. Seller will combine multiple winning bids to save bidder money on shipping. Items will be insured for the bid price. Our warehouse hours are Monday – Friday 8:00am – 5:00pm Please call before you come to verify items are in stock, we try to keep all advertised items in stock at all times, we would hate to have you visit us and not have the item you are looking for when you get here! Payment Terms High bidder prepays and adds for above shipping and handling charges. Items must be paid in full within 10 days of auction end. Personal check orders held 10 days or until check clears. Ohio Residents Only State of Ohio residents must add 7.25% state sales tax. Both product and shipping and handling charges are subject to state sales tax If this auction is for farm use you can fill out a farm use tax exemption certificate and no sales tax will be applied. Farm use tax exemption certificates must be on file before we ship or sales tax will be applied. Return Policy Your complete satisfaction is important to us. We have a simple return and refund policy. All returns are subject to a 10% restocking fee. Bidder is responsible for all shipping charges on returned merchandise. Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs! All returns must be insured when returned; we will not refund items that are damaged when returned. All returns must be within 30 days of auction end. All refunds will be for full bid price paid less 10% restocking charge. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
King Kutter Tiller Rotor Double Lip oil Seal 50501755D x 80 OD x 12 mm Replacement for Rural King Brand New High Quality Rotor and Side Gear Box Oil Seal Also for Rural King Country Way Rotary Tiller Side Gear Box SDLSG13 Fits Rural King Country Way and Sicma 4-5-6-7 Foot Rotary Tiller (SKU# 8406500, 8406502, 8406504, 8406506) Phoenix (Sicma) 6204562 King Kutter 505017Rankin OS558012 Tar River OS558012 MPN 05-RT-050