Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + union. D: 210 mm (stroke). This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
Hydraulic Top link Cat 2+2 with Hook, 550mm-755mm /205mm Stroke with valve+Hoses. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
Including Hoses, Quick couplers as picturedHose Length : 33.5 ” . The male quick couplers are 1/2″ BSP Poppet StyleThe piston rod can be rotated as needed.This side link is equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve
Hydraulic top link cat. 2 – with locking block 570- 850 mm with 2 x hose Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block *. * When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. Furnishing: High quality and workmanship and paintedIncl. Locking blockTop link cat. 22x hydraulic connectionDelivery is completely assembled Technical specifications: Hydraulic connection: 3/8 “E: 570-850 mmA: 63 mmW: 73 mmC: 35 mmM: 75 mmN: 51mmH: 25.4 mmF: 65 mmD: 280 mm (stroke)Hydraulic pressure max. 200 barThrust: 4 toPulling force: 2.5 toWeight about 13 kg + 2 x hydraulic hose with plug and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330Operating pressure: 180 barLength: 75 cm
Hydraulic top link cat. 2-2 with locking block 690-1090 mm with 2 x hose Description: Our offered hydraulic top link will be the already experienced top link on the tractor and preferably the work. A double-acting control valve on the tractor is part of it – in combination with its own locking block * an unbeatable combination. * With top link it is very important that the hidden setting position is also after the time has elapsed. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is the view with a lock block related to the control. With this valve, the oil is released through a check valve in the cylinder. Only when the oil pressure from the tractor has returned and the valve and the cylinder adjust themselves. Furnishing: High quality and processes and paintedIncl. Locking blockTop link cat. 22x hydraulic connectionDelivery instead of fully assembled Technical specifications: Hydraulic connection: 3/8 “E: 690-1090 mmA: 63 mmW: 73 mmC: 35 mmJ-M: 75 mmK-N: 51 mmH-L 25.4 mmF: 65 mmD: 400 mmHydraulic pressure max. 200 barThrust: 4 toPulling force: 2.5 toWeight about 15.90 kg + 2 x hydraulic hose with plug and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blau Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330Operating pressure: 180 barLength: 75 cm
Hydraulic top link cat. 1 + 1 catch hook 160 mm stroke locking block hoses 19.2. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
Hydraulic top link cat. 2 – with locking block 500- 710 mm with 2 x hose Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block *. * When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. Furnishing: High quality and workmanship and paintedIncl. Locking blockTop link cat. 22x hydraulic connectionDelivery is completely assembled Technical specifications: Hydraulic connection: 3/8 “E: 500-710 mmA: 63 mmW: 73 mmC: 35 mmM: 75 mmN: 51mmH: 25.4 mmF: 65 mmD: 210 mm (stroke)Hydraulic pressure max. 200 barThrust: 4 toPulling force: 2.5 toWeight about 13 kg + 2 x hydraulic hose with plug and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330Operating pressure: 180 barLength: 75 cm
Hydraulic top link cat. 1 – 1 with locking block 360-470mm with 2 x hose Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block *. * When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. Furnishing: High quality and workmanship and paintedIncl. Locking blockTop link cat. 12x hydraulic connectionDelivery is completely assembled Technical specifications: Hydraulic connection: 3/8 ” Tractor top link with Ø19mm (3/4”) pin holes on both ends (the piston can be rotated as needed)Ball width: 44mm (1-3/4”) (both ends)Cylinder bore: Ø50mm ( 2”)Cat 1 top link rod diameter: Ø30mm (1-3/16”) Hydraulic pressure max. 250 barThrust: 3.5 toPulling force: 2.3 toWeight about 8 kg + 2 x hydraulic hose with plug and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 Operating pressure: 180 barLength: 75 cm
Hydraulic top link cat. 1 + 1 catch hook 210 mm stroke locking block hoses 19.2. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
Hydraulic top link cat. 1 – 1 with locking block 650-1050 mm with 2 x hose Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block *. * When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. Furnishing: High quality and workmanship and paintedIncl. Locking blockTop link cat. 12x hydraulic connectionDelivery is completely assembled Technical specifications: Category: 1Hydraulic pressure max. 250 barThrust: 3.5 toPulling force: 2.3 toWeight about 10.35 kg + 2 x hydraulic hose with plug and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330Operating pressure: 180 barLength: 70 cm
- 1
- 2